Magnetic Products

2019年12月19日星期四

Hybrid Bonded Molded Ferrite Permanent Magnets

Hybrid Bonded Molded Ferrite Permanent Magnets, Injection Bonded Ceramic Ring Magnets, Injection Bonded Hybrid Magnets, Ring Hybrid Ferrite Molded Magnets, Customized Dimension Precision Bonded Ferrite Ceramic Magnets

Hybrid Molded Ferrite Magnets – Injection magnet is composed of nylon and magnetic powder, which is produced by injection moulding with special injection moulding machine. Compared with other methods of making permanent magnets, injection moulding has unique and irreplaceable advantages. It is of strong anti-corrosion ability and high dimensional precision control. It is mainly used in automatic equipment, brushless DC motor, rotor, frequency conversion fan motor and so on. Injection Bonded Magnets are a combination of good magnetic strength and strong physical properties. The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, thus saving costs. MPCO Magnets offers a range of injection bonded ferrite magnets that are recognised for high durability and utility. The magnets can be manufactured as per design or custom designed to suit the applications. Ring Injection Bonded Ferrite Magnets Bonded Ferrite is injection molded using Nylon 6, Nylon 12 and PPS which can be easily aligned in the mold to achieve higher magnetic properties and custom waveforms.

Characteristics Huge variety of shaping possibilities for intricate and complex shapes Very good edge strength and greater resistance to Impacts. Dimensional precision with very high consistency without any additional processing. Consistent magnetic characteristics built to suit custom assemblies. Non-corrosive due to their anti-oxidation characteristics Simple to complex multi-pole magnetization possible. Isotropic/Anisotropic Magnets can be manufactured with very high efficiency and reliability Reduction in weight of the magnet as compared to sintered magnets. Monobloc molding (Insert molding/Over molding) possible thereby reducing extra assembly operations. Highly competitive for multi-pole motor and sensor magnets High Degree of machinability. Isotropic / Anisotropic Hybrid Bonded Magnets, Permanent Magnets

Injection Bonded BLDC Motor Sensor Magnets

Injection Bonded BLDC Motor Sensor Magnets, BLDC Motor Magnets, Hybrid Molded Ferrite Sensor Magnets for BLDC Motor, Injection Bonded Ring Magnets, Customized Dimension Precision Bonded brushless DC motor magnets Injection Bonded BLDC Motor Sensor Magnets are composed of nylon and magnetic powder, which is produced by injection moulding with special injection moulding machine. Compared with […]

Injection Molding Bonded BLDC Motor Magnets

Injection Molding Bonded BLDC Motor Magnets, Hybrid Molded Ferrite Magnets for BLDC Motor, Injection Bonded Hybrid Magnets, Customized Dimension Precision Bonded brushless DC motor magnets Injection Molding Bonded BLDC Motor Magnets are composed of nylon and magnetic powder, which is produced by injection moulding with special injection moulding machine. Compared with other methods of making […]

Over Molded Injection Magnets

Over Molded Injection Magnets, High Temperature Injection Molded Magnets, Injection Molding Bonded Magnets, Customized Precision polymer Over molding ensured Hybrid Bonded Magnets Over Molded Injection Magnets are over molded with a very thin layer of polymers like POM, Nylons, PPS etc. to either shield them from dust, grease, oils & chemicals OR for some functional […]

High Temperature Insert Injection Molded Magnets

High Temperature Insert Injection Molded Magnets, Injection Molding Bonded Magnets, Hybrid Insert Molded Magnets, injection molding Hybrid Magnets, Customized Dimension Precision Bonded Magnets High Temperature Insert Injection Molded Magnets – Injection Bonded Magnet Manufacturing Process has a unique advantage of in-situ molding of steel shafts, brass bushes etc. while molding of the magnets. Magnetic materials […]

2019年12月16日星期一

Multipolar Ring Bonded Injection Ferrite Ceramic Magnet

Multipolar Ring Bonded Injection Magnets, Bonded Ring & Disc Magnets, injection moulded magnet, compression bonded magnet, bonding magnets, multi-pole ring magnets, moulding magnets

Bonded Injection Magnets Powder NdFeB, SmCo, Ferrite Shape Ring, Disc Magnetization Direction Thickness or Custom request Plating Epoxy Maximum Operating Temperature 120-180°C Density (g/cm3) 5.6-6.4 Key Benefits High magnetic performance. Maximum Energy Product(BHmax) can reach 18MGOe; Extremely tight tolerances. Suitable for various shapes or over components in assembly; Stable working temperature. The most high working temperature can be up to 180°C; Good corrosion resistance in water and industrial solvents; Flexible multipole mumagnetized in any direction; High efficient magnets compared to other magnets. Bonded magnets, also called compression bonded magnets, are an excellent choice over other magnet types. They are suitable for the application which request high magnetic field strength, general mechanical strength, and simple compression shape. Bonded magnets are manufactured by molding compression of the compound alloy powder (Neodymium or SmCo) with resin.

The resin is further processed to form magnets and resistant to normal industrial solvent and automotive fluids. Since no magnetic field is applied during the compression, the finished product can be magnetized in any direction. The normal application temperatures range from below -40°C to above 165°C. Injection magnets, also called injection molded magnets, are produced by an injection process of pre-mixed magnetic powder or mixed other composite material. Magnetic powders include Ferrite, Neodymium, and SmCo. Binder types include Nylon 6 and 12, PPS, and Polyamide, which produces an accurate and homogeneous magnetic part. Through this process magnets can be directly molded into various shapes (thin-wall ring, rods, slice, holes and pins, etc.) or over the components (shafts, cams, inserts and the like eliminating some steps) in assembly, with extremely tight tolerances and a broad range of magnetic properties and characteristics. Injection Molded magnets have good corrosion resistance in water and industrial solvents. The binders and magnetic alloys are capable of a wide range of application temperatures from below -40°C to above 180°C. Bonded Ring & Disc Magnets

Anisotropic Multipolar Ring Magnet

Large Diameter Ferrite Anisotropic Multipolar Ring Magnet, Custom Anisotropic Multipolar Ring Ceramic Magnet, Bonded Ferrite Permanent Magnets, hard ferrite ring industrial magnets Anisotropic Multipolar Ring Magnet Features: Material Permanent Ferrite Magnet Color Black Shape ring Density 7.3–7.4G/CM3 Grade customized Sample Free Packing Magnets+ Small Carton+ Green Foam + Big Carton Delivery Time Shipped in 10 […]

Large Diameter Ferrite Ring Multi-polar Permanent Magnet

Large Diameter Ferrite Ring Multi-polar Permanent Magnet, Anisotropic Multipolar Ring Ceramic Magnet, Injection Molding Ferrite Permanent Magnets, hard ferrite magnet ring industrial magnets, customized anisotropic multipolar ring ferrite magnets Large Diameter Ferrite Ring Multi-polar Permanent Magnet Features: Material Permanent Ferrite Magnet Color Black Shape ring Density 7.3–7.4G/CM3 Grade customized Sample Free Packing Magnets+ Small Carton+ […]

Ferrite Anisotropic Multipolar Ring Magnet

Ferrite Anisotropic Multipolar Ring Magnet, Injection Molded Permanent Magnets, ferrite magnet ring industrial hard magnets, customized anisotropic multipolar ring ferrite magnets Multipolar Ferrite ring magnets Ferrite Anisotropic Multipolar Ring Magnet Features: Material Permanent Ferrite Magnet Color Black Shape Arc /dic/ring Density 7.3–7.4G/CM3 Grade customized Sample Free Packing Magnets+ Small Carton+ Green Foam + Big Carton […]

Anisotropic Injection Ferrite Multi-polar Magnetic Ring

Anisotropic Injection Ferrite Multi-polar Magnetic Ring, Injection Molding Bonded Ferrite for water pump injection moulding rotors, Water Pump Customized Injection Ferrite Radial Rings, Radially Oriention Cylinder Ferrite Magnets Anisotropic Injection Ferrite Multi-polar Magnetic Ring Feature: Model: Customized Grade: HF8/22, Y25,Y36 Shape: Ring or Cylinder Dimensions: Customized Br: 2100-4500 Gs Hcj: 1650-3400 Oe Surface Gauss: / […]

2019年12月13日星期五

Multi-pole magnetization and screw angle magnetization Bonded Ferrite Magnet Ring

Custom Anisotropic Bonded Ferrite Ring & Rotor Magnet, Multi-pole magnetization and screw angle magnetization Ferrite Magnet Ring Multipole Ring Magnet, Bonded Ferrite Ring Permanent Magnets for motor, car seats

Custom Anisotropic Bonded Ferrite Ring & Rotor Magnet Feature: Material SrO/BaO/Fe2O3 Size Customize Shape Customize Density 4.8~4.9g/cm3 Grade Y10T-Y30 Anisotropic Multi-Polar Ring ferrite Magnets This process consists of combining nanocrystalline base powders, pressing the resulting material, and then baking or sintering the resulting ring to achieve a radially magnetized product. This new technology improves the magnetic flux which in turn provides better efficiency and performance. anisotropic multi-polar ring magnet Introduction: The anisotropic multi-polar ring magnet, CRI type was developed mainly for stepping motor application. It has pole-to-pole oriented crystal grains, and therefore has the highest surface flux density and the largest total flux value among ring shaped ferrite magnets. anisotropic multi-polar ring magnet

Applications: These features fit downsizing and/or performance improvement of its applications such as stepping motors, time-rotors, various types of sensors, etc. Product name Y30 Y35 Ferrite Anisotropic Multipolar Ring Magnet Material Fe2O3, SrCO3, etc. Size Customize Shape Ring, etc Density 4.9g/cm³ Packing Standard sea or air packing, such as carton, iron, wooden box, etc. Delivery date 7 days for samples; 20-25 days for mass goods. Our factory specialized in reseraching, developing, producing and marketing of magnets, located in Ningbo city, where is only 40 minutes’s drive away from Nanjing. The flexibility of our organization and management, high efficiency of cost control and advanced standard of quality assurance, have earned us strong partnership with several high-tech enterprises, with whom we work together in magnets research and application.

Metal Injection Molding Ferrite Magnets for Auto Spare Parts

Metal Injection Molding Ferrite Magnets for Auto Spare Parts, Industrial Permanent Injectioned Ferrite Magnet, Precision Bonded or Injection Molded Magnets, Metal Plastic Ferrite Magnets for Car Metal Injection Molding Ferrite Magnets for Auto Spare Parts Specifications: Type: Permanent Composite: Plastic Ferrite Shape: customer Color: black / gray Material: Plastic + Metal + ferrite magnet Grade: […]

Injection Molding Ferrite Magnet for Washing Machine

Injection Molding Ferrite Magnet for Washing Machine, Industrial Magnet for Washing Machine Driver, Permanent Ferrite Industrial Magnet, Injection Plastic Ferrite Magnet Assembly Injection Molding Ferrite Magnet for Washing Machine Feature: Material Injection Ferrite Magnet Application Washing Machine Driver Type: Permanent Composite: Plastic Magnet Shape: customer Color: black Material: Plastic + ferrite magnet Grade: PBF-10,PBF-11,PBF-13,PBF-15 Coercive […]

Permanent Ferrite Industrial Magnet

Permanent Ferrite Industrial Magnet, Injection Plastic Ferrite Magnet Assembly, Anisotropic Ferrite Multipolar Ring Magnet, Custom Magnet for magnetic motor or rotor parts, Bonded Ferrite Plastic Permanent Magnets China supplier Permanent Ferrite Industrial Magnet Assembly Features: Type: Permanent Composite: Ferrite Magnet Shape: Customization Application: Industrial Magnet Material: Ferrite Grade: Y25-Y35 Size: Customized Magnet Size Certification: ROHS […]

Injection Ferrite Magnet Assembly

Injection Ferrite Magnet Assembly, Anisotropic Ferrite Multipolar Ring Magnet, Custom Ring Ceramic Magnet for magnetic motor or rotor parts, Bonded Ferrite Permanent Magnets, hard ferrite industrial magnets China supplier Injection Ferrite Magnet Assembly Features: Type: Permanent Composite: Ferrite Magnet Shape: Customization Application: Industrial Magnet Material: Ferrite Grade: Y25-Y35 Size: Customized Magnet Size Certification: ROHS Color: […]

2019年12月10日星期二

Injection Bonded Hybrid Magnets Ferrite Ring

Injection Bonded Hybrid Magnets, Hybrid Bonded Magnets, Injection Bonded Rare Earth and Ferrite Mix Magnets, Isotropic / Anisotropic Hybrid Magnets, Hybrid magnetic material

Injection Bonded Hybrid Magnets / Hybrid Magnets are a mix of Rare Earth and Ferrite materials primarily developed to achieve comparatively higher magnetic properties than Injection Bonded Ferrites but at an affordable cost compared to the Injection Bonded Rare Earth Magnets.

Characteristics Isotropic / Anisotropic Hybrid Magnets can cover a very large range of magnetic properties Magnetic properties can be tailor made over a very broad spectrum Sintered Ferrite Magnets can be replaced in a lot of applications by proper selection of Hybrid magnetic material It is a very promising material for the future due to advantages of higher magnetic properties than Ferrite Magnets and lower costs than the Rare Earth Magnets Various properties like the Surface Flux Density at various air gaps, the intrinsic Coercive force and temperature coefficient of the magnet material can be adjusted to suit the application Various other magnetic and non-magnetic inclusions in the material matrix open the door for endless mix of physical and magnetic characteristics

Specifications

MAGNETIC COMPOUNDS FOR HYBRID BONDED MAGNETS
GRADES		H2819	H3019	H3523	H3831	H4135	H4645
Property	Units	PPS	PA12	PA12	PA12	PA12	PA12
Br Residual Induction	mT (G)	275 – 295 (2750 – 2950)	300 – 320 (3000 – 3200)	350 – 370 (3500 – 3700)	380 – 400 (3800 – 4000)	410 – 430 (4100 – 4300)	460 – 480 (4600 – 4800)
bHc Coercive Force	kA/m (Oe)	180 – 210 (2250 -2625)	160 – 190 (2000 – 2375)	160 – 176 (2000 – 2200 )	192 – 208 (2400 – 2600)	220 – 236 (2750 – 2950)	280 – 296 (3500 – 3700)
iHc Intrinsic Coercivity	kA/m (Oe)	270 – 300 (3375 – 3750)	328 – 352 (4100 – 4400)	248 – 272 (3100 – 3400)	384 – 408 (4800 – 5100)	480 – 504 (6000 – 6300)	632 – 656 (7900 – 8200)
BHmax Max. Energy Product	kJ/m³ (MGOe)	14.4 – 16 (1.80 – 2.00)	14 – 15.6 (1.75 – 1.95)	17.6 – 19.2 (2.20 – 2.40)	24 – 25.6 (3.00 – 3.20)	27.2 – 28.8 (3.40 – 3.60)	35.2 – 36.8 (4.40 – 4.60)
Maximum Operating Temperature	Deg C	180	125	125	125	125	125
Type	Isotropic / Anisotropic	Anisotropic	Anisotropic	Anisotropic	Anisotropic	Anisotropic	Anisotropic

MPCO Magnet used Sensor Industries

Ring Ferrite Injection Molding Bonded Magnets

Ring Ferrite Injection Molding Bonded Magnets, Hybrid Molded Ferrite Magnets, Ceramic Ring Magnets, Injection Bonded Hybrid Magnets, Customized Dimension Precision Bonded Ferrite Ceramic Magnets Ring Ferrite Injection Molding Bonded Magnets are composed of nylon and magnetic powder, which is produced by injection moulding with special injection moulding machine. Compared with other methods of making permanent […]

Hybrid Molded Ferrite Magnets

Hybrid Molded Ferrite Magnets, Injection Bonded Ceramic Ring Magnets, Injection Bonded Hybrid Magnets, Ring Hybrid Ferrite Molded Magnets, Customized Dimension Precision Bonded Ferrite Ceramic Magnets Hybrid Molded Ferrite Magnets – Injection magnet is composed of nylon and magnetic powder, which is produced by injection moulding with special injection moulding machine. Compared with other methods of […]

Ring Injection Bonded Ferrite Magnets

Ring Injection Bonded Ferrite Magnets, Injection Bonded Hybrid Magnets, Ring Hybrid Ferrite Molded Magnets, Dimensional Precision Bonded Ferrite Ceramic Magnets Ring Injection Bonded Ferrite Magnets are a combination of good magnetic strength and strong physical properties. The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, […]

Isotropic / Anisotropic Hybrid Bonded Magnets

2019年12月7日星期六

Anisotropic Multipolar Ring Ferrite Magnets

Anisotropic Multipolar Ring Ferrite Magnets, anisotropic multi-polar ring magnet for Rotor Motor, Multi-pole magnetization Industrial Magnet, Bonded Ferrite Ring Permanent Mould Magnets

D70*d45*H50-8P Ferrite Anisotropic Multipolar Ring Magnets Feature: Material SrO/BaO/Fe2O3 Size D70*d45*H50-8P Shape Ring Tube Grade 8P Anisotropic Multi-Polar Ring Injection bonded ferrite Magnets This process consists of combining nanocrystalline base powders, pressing the resulting material, and then baking or sintering the resulting ring to achieve a radially magnetized product. This new technology improves the magnetic flux which in turn provides better efficiency and performance. The Injection molded anisotropic multi-polar ring magnet CRI type was developed mainly for stepping motor application. It has pole-to-pole oriented crystal grains, and therefore has the highest surface flux density and the largest total flux value among ring shaped ferrite magnets. anisotropic multi-polar ring magnet Applications: These features fit downsizing and/or performance improvement of its applications such as stepping motors, time-rotors, various types of sensors, etc.

Custom Anisotropic Bonded Ferrite Ring & Rotor Magnet Product name Y30 Y35 Ferrite Anisotropic Multipolar Ring Magnet Material Fe2O3, SrCO3, etc. Size Customize Shape Ring, etc Density 4.9g/cm³ Packing Standard sea or air packing, such as carton, iron, wooden box, etc. Delivery date 7 days for samples; 20-25 days for mass goods. Our factory specialized in reseraching, developing, producing and marketing of magnets, located in Ningbo city, where is only 40 minutes’s drive away from Nanjing. The flexibility of our organization and management, high efficiency of cost control and advanced standard of quality assurance, have earned us strong partnership with several high-tech enterprises, with whom we work together in magnets research and application.

Injection Bonded Hybrid Magnets

Injection Bonded Hybrid Magnets, Hybrid Bonded Magnets, Injection Bonded Rare Earth and Ferrite Mix Magnets, Isotropic / Anisotropic Hybrid Magnets, Hybrid magnetic material Injection Bonded Hybrid Magnets / Hybrid Magnets are a mix of Rare Earth and Ferrite materials primarily developed to achieve comparatively higher magnetic properties than Injection Bonded Ferrites but at an affordable […]

D70d45H50-8P Ferrite Anisotropic Multipolar Ring Magnets

D70*d45*H50-8P Ferrite Anisotropic Multipolar Ring Magnets, anisotropic multi-polar ring magnet for Rotor Motor, Multi-pole magnetization Industrial Magnet, Bonded Ferrite Ring Permanent Mould Magnets D70*d45*H50-8P Ferrite Anisotropic Multipolar Ring Magnets Feature: Material SrO/BaO/Fe2O3 Size D70*d45*H50-8P Shape Ring Tube Grade 8P Anisotropic Multi-Polar Ring Injection bonded ferrite Magnets This process consists of combining nanocrystalline base powders, pressing […]

Custom Anisotropic Bonded Ferrite Ring & Rotor Magnet

Multipolar Ring Bonded Injection Magnets

Multipolar Ring Bonded Injection Magnets, Bonded Ring & Disc Magnets, injection moulded magnet, compression bonded magnet, bonding magnets, multi-pole ring magnets, moulding magnets Bonded Injection Magnets Powder NdFeB, SmCo, Ferrite Shape Ring, Disc Magnetization Direction Thickness or Custom request Plating Epoxy Maximum Operating Temperature 120-180°C Density (g/cm3) 5.6-6.4 Key Benefits High magnetic performance. Maximum Energy […]

2019年12月4日星期三

Ring Hybrid Injection Ferrite Molded Magnets

The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, thus saving costs. Ashvini Magnets offers a range of injection bonded ferrite magnets that are recognised for high durability and utility. The magnets can be manufactured as per design or custom designed to suit the applications. Bonded Ferrite is injection molded using Nylon 6, Nylon 12 and PPS which can be easily aligned in the mold to achieve higher magnetic properties and custom waveforms.

Characteristics Huge variety of shaping possibilities for intricate and complex shapes Very good edge strength and greater resistance to Impacts. Dimensional precision with very high consistency without any additional processing. Consistent magnetic characteristics built to suit custom assemblies. Non-corrosive due to their anti-oxidation characteristics Simple to complex multi-pole magnetization possible. Isotropic/Anisotropic Magnets can be manufactured with very high efficiency and reliability Reduction in weight of the magnet as compared to sintered magnets. Monobloc molding (Insert molding/Over molding) possible thereby reducing extra assembly operations. Highly competitive for multi-pole motor and sensor magnets High Degree of machinability. Isotropic / Anisotropic Hybrid Bonded Magnets

Injection Bonded Ferrite Molding Roll Over Sensor Magnets

Injection Bonded Ferrite Molding Roll Over Sensor Magnets, Injection Bonding Ferrite Ceramic Magnets, Sensor Or Encoder Magnets, Multipole Bonded Isotropic/Anisotropic Magnets Injection Bonded Ferrite Molding Roll Over Sensor Magnets Feature: Material Injetion Bonded Ferrite and Steel Coating No Design Drawing As customers’ requests Tolerence +/-0.05mm Technology Injetion Ferrite Used Roll Over Sensors and Encoders Characteristics […]

Position Encoder Magnets Bonded Ferrite Rings

Position Encoder Magnets Bonded Ferrite Rings, Injection Bonded Ferrite Magnets, Sensor Or Encoder high consistency Bonded Ferrite Ring Magnets, Multipole Ring Bonded Isotropic/Anisotropic Encoder Magnets Position Encoder Magnets Bonded Ferrite Rings Feature: Material Injetion Bonded Ferrite Coating No Size As customers’ requests Tolerence +/-0.05mm Technology Injetion Ferrite Used Position Sensors and Encoders Characteristics Huge variety […]

Position Sensor Magnets Injection Bonded Ferrite

Position Sensor Magnets Injection Bonded Ferrite, Position Sensor Or Encoder Magnets Bonded Ferrite Rings, Multipole Ring Position Sensor Bonded Magnets Position Sensor Magnets Injection Bonded Ferrite Feature: Material Bonded Ferrite Coating No Size As customers’ requests Tolerence +/-0.05mm Technology Injetion Ferrite Used Position Sensors and Encoders Magnets are over molded with a very thin layer […]

Multipole Magnetized Epoxy Coated Flat Block Ferrite Cow Magnet

Multipole Magnetized Epoxy Coated Flat Block Ferrite Cow Magnet, Rectangular Ceramic Cow Magnet, Ceramic 5 (Strontium Ferrite) Block Ferrite Cow Stomach Magnet, prevent Hardware Disease Rumax Ceramic C5 Rectangle Magnets, Black nylon coated block ferrite rumen magnet Multipole Magnetized Epoxy Coated Flat Block Ferrite Cow Magnet Specifications: Part No.: MPCO-COW-07 Material: Strontium Ferrite / Ceramic […]

2019年12月1日星期日

Isotropic / Anisotropic Hybrid Rare Earth and Ferrite Bonded Magnets

Isotropic / Anisotropic Hybrid Bonded Magnets, Injection Bonded Hybrid Magnets, Hybrid Molded Magnets, Injection Bonded Rare Earth and Ferrite Magnets, Hybrid plastic bonded magnets, polymer bonded magnets

Isotropic / Anisotropic Hybrid Rare Earth and Ferrite Bonded Magnets are a mix of Rare Earth and Ferrite materials primarily developed to achieve comparatively higher magnetic properties than Injection Bonded Ferrites but at an affordable cost compared to the Injection Bonded Rare Earth Magnets. Characteristics Isotropic / Anisotropic Hybrid Magnets can cover a very large range of magnetic properties Magnetic properties can be tailor made over a very broad spectrum

Sintered Ferrite Magnets can be replaced in a lot of applications by proper selection of Hybrid magnetic material It is a very promising material for the future due to advantages of higher magnetic properties than Ferrite Magnets and lower costs than the Rare Earth Magnets Various properties like the Surface Flux Density at various air gaps, the intrinsic Coercive force and temperature coefficient of the magnet material can be adjusted to suit the application Various other magnetic and non-magnetic inclusions in the material matrix open the door for endless mix of physical and magnetic characteristics BCN – Bonded Compression Neo BCNF – Bonded Neo Ferrite Hybrid BIF – Bonded Injection Ferrite BIN – Bonded Injection Neo BIS – Bonded Injection SmCo N – Sintered NdFeB C – Sintered SrFe2O3 Ferrites S – Sintered SmCo5, Sm2Co17 A – Cast and Sintered AlNiCo Hybrid Magnets can be made by Compression Molding (BCNF and BCNU) or by Injection Molding (BINF) with resins such as Nylon 6, Nylon 12 or PPS. The resulting grades have properties that cannot be achieved by typical Ferrite, SmCo or NdFeB bonded molding processes.

订阅：博文 (Atom)